Ford’s goal for 1966 was 700,000 Mustangs to built in an extended model year. A new deluxe interior featuring the galloping pony seat inserts served to continue its popularity. Instead of a separate luxury model, Ford decided to offer a set of luxury options. These options were given the name ‘Interior Decor Group’. Most noticeable of these features was the galloping pony inserts on the seats. For this reason, the Interior Decor Group is often referred to as the ‘Pony’ interior. These special interiors were also known as Deluxe or Luxury interiors. Cars with the ‘Pony’ interior trim were sometimes called ‘Ponycars’ or ‘Pony Mustangs’. In 1966 Ford offered many styling ‘refinements’. The options/accessories in the 1966 Mustang totalled over 70 compared to 50 in 1964.
Item includes certificate with individual production number.
Product Description: 500 Championship Race Wins For Holden Commodore: The Official Photographic History by Aaron Noonan and Will Dale
Product Specifications:
• 360 Page hardcover book
• Size: (W) 300mm X (H) 240mm
• Numbered Limited Edition
• Produced by V8 Sleuth’s award-winning author Aaron Noonan and Will Dale
• Official Licensed Holden Product
About This Product:
The Commodore nameplate has been a dominant icon of Australian motorsport since its first touring car racing appearance in 1980, and in 2019 it celebrated the significant milestone of claiming its 500th championship race win.
Never before attempted, this 360 page, hardcover, limited edition collector’s book by award-winning author Aaron Noonan along with respected journalist Will Dale and publisher V8 Sleuth will include over 500+ photos, featuring every championship race-winning Commodore and much more.
Hot on the heels of last year’s sold-out ‘Holden at Bathurst: The Cars: 1963-2017’ and the previously released award-winning ‘Holden Racing Team, The Cars 1989-2016’ releases by the same author, this book will also be a limited edition collector's release and is bound to be very popular - so don’t miss out!
The new 500 Championship Race Wins For Holden Commodore book will feature:
Rare and never-before-published photos of every Holden Commodore to win a championship race in the Australian Touring Car Championship / V8 Supercars / Supercars Championship series since 1980.
Every winning car will be beautifully presented with a very impressive amount of data featured including:
driver names
team names
model details
race date, round and circuit
starting position
race time
number of race laps
second place driver/s
margin to second
race finish rate
fast fact notes relating to each car
Be produced in a numbered limited edition
A detailed introduction chapter by Aaron Noonan
Profiles and information highlighting the top 10 drivers with the most championship race wins in a Commodore
Further statistical analysis and insights
All of the iconic cars, teams and drivers to have ever won a championship race in a Commodore
Australian-made and printed in Australia via green printing methods, this book is a must-have for the collection of any Holden, motorsport, motoring or automotive enthusiast.
Original watch (chronograph) from AUDI - Audi Business watch with calendar weeks. Matte watch with three hands, an additional button for indicating the calendar week, month and date. Swiss watch mechanism Ronda 706B. Satin-finished stainless-steel case, signature Audi rings on a black dial with luminous numbers and hands, curved protective glass K1. Black sheepskin strap, water-resistant to 10 atm. Made in Germany. Case diameter: 40 mm.
The ideal way to transport your garments. The clothes hanger integrates with the vehicle interior, it can be easily and quickly mounted on the head restraint and carries your free-hanging garment securely and safely.
1:43 scale model. Detailed miniature of the Audi e-tron FE05 formula E race car of the driver Luca Di Grassi, it has the highest quality in collectible models with a figure of the driver made of plastic and zinc. Not suitable for children under 3 years.
Discover the Audi mouth-nose-masks in a pack of two.
Details:
Set of 2 face coverings in red and grey
Extremely lightweight, breathable and air-permeable functional material
Breathe and talk easily
Adjustable elastic bands with clip for individual adjustment
Reusable, washable at 90 °C
Audi rings print, co-branding with P.A.C.
One size fits all for adults with small clip for individual adjustment
Material:
Polyester
Elastane
Colour:
Red
Grey
Note:
This product is not appropriate for use in the health and social care sector, and it is not designed for health and safety at work or as other protective equipment for protection against infections or other harmful substances.
Bracelet in dark brown Italian leather with satin steel metal clasp. Audi rings on the clasp. Collaboration with designer Antonio Ben Chimol. Dimensions: length with clasp 60 cm, on a wrist of 18 cm.
Fashionable all-rounder: the Audi Rings T-shirt in dark blue.
Details:
- Audi Rings T-shirt for men
- Audi rings embroidered in tone-in-tone velor at the front
- 1/2 sleeves and round neckline
- Audi logo on the inside of the neck
Material:
100 % cotton
Dark brown teddy bear with shiny nose and ears, in original DTM racing clothing, Audi hoops and Audi Sport logo.
Size approx. 40 cm
Material 100% polyester
The product can be washed in a washing bag at 30 °C.
Audi Q2 is a city SUV that combines a number of qualities - powerful, maneuverable, compact, efficient and expressive. Year of production: since 2016. Manufacturer: Herpa. Scale: 1:87.
Officially Licensed Remote-controlled car Built to 1:24 scale with authentic styling and modifications
Dashboard-style R/C controller with multiple frequencies, Left-right and forward-reverse steering
Requires two AA batteries for the vehicle and two AA batteries for the controller
The Audi RS Q3 Sportback is reproduced here on a 1:18 scale in a Tango Red livery. This miniature car made for Audi receives official packaging from the brand with the rings.
Wristwatch with three hands, charged by solar energy (solar panels on the dial). Case made of matte stainless steel, gray bezel with a ribbed surface, olive-colored dial with coral-orange pointers and hands, Epson / Seiko VS37A watch movement with date display, strap made of functional gray woven material (quantum gray), mosaic pattern on the inside of the strap, water resistance up to 10 atm., with a logo in the form of Audi branded rings. Case size: diameter 38 mm
High-tech excellence even under water - with the Audi Sport PreciDrive diving watch. Details: - Case made of stainless steel - K1 resistant mineral glass - Water resistance: 10 ATM (100 m) - Water resistance complies with the standard according to DIN 8310 / ISO 2281 - With ETA F07.411 Swiss PreciDrive movement - Strap Lug: 22 mm - Case diameter without crown: 45 mm - Swiss made Material: stainless steel, mineral glass
Time for more sportiness – with the Audi Sport three-hand watch made of matt black plastic with fiberglass. Details: - Audi Sport three-hand watch - Case made of matt black plastic with fiberglass - Silicone strap with the structure of the Audi Sport diamond - With luminous hands and hour indicator - Black aluminum rotating ring - Japanese Miyota quartz movement with date display - Stainless steel case back - Water resistance: up to 5 ATM - Dimensions: Case diameter: 45mm Material: plastic/silicone
A stunning piece of jewelry! A pink-brown leather bracelet with a comfortable magnetic clasp made of satin-finished steel. Italian leather, with the Audi logo on the clasp. A collaboration with Italian jewelry designer Antonio Ben Cimolo.
This C5 X weekend bag will be the new essential for your trips.
Chic and practical, it has two handles that allow it to be carried by hand.
Its dimensions are ideal for the car or the plane.
There were 55 cars starting the 1965 Bathurst, the biggest entry the race had ever seen. There were a lot of firsts for the race this year, the first international drivers appeared and the first time a Japanese car would race. It was also the first time a outright winner was recognised, this saw fierce competition by manufactures to produce a race winning car, and bragging rights of a true Bathust winner.
The main competition for the outright winner was between the Mini Cooper S and the Cortina GT 500. The Geoghegan brothers Cortina was favourite and secured Pole Position, although the Minis had not qualified well, they were pushing their way through the field once the flag dropped. While the leaders were battling out in front, Seton was running comfortably further back in 5th position.
The GT 500 was a one-off race car and was not yet race proven. After the Geoghegan Cortina completed its first stop, the car was low on power and immediately returned back to the pits for new plugs. Several Cortinas had began to retire from the race, but the Seton/Bosworth car was going strong and now leading from McPhee/Mulholland, also in a Cortina.
Although the Mini Coopers were as quick as the Cortinas, the extended fuel tank of the GT 500 gave them the edge. The 11D Cortina GT 500 of Seton/Bosworth would go on to a comfortable win, two minutes ahead of McPhee.
Item includes certificate and production number plate, mounted to the chassis.
Limited Edition of just 504 examples. Last one in stock.
Authentic Interior Trim
Detailed Engine Compartment
Turning Front Wheels
Opening Bonnet, Doors and Boot
Produced in Diecast
The 1972 Bathurst was memorable as it was the first time rain had significantly affected the race. It was won by Peter Brock driving a Holden Dealer Team Torana, the first of Brock’s record nine victories. Brock finished a lap ahead of Queensland racer John French driving a Ford XY Falcon GT-HO Phase III, this despite Brock being penalised one minute at his last pit stop for starting his car while the HDT crew were still re-fueling.
Pole sitter and winner of the previous two Bathurst races, Allan Moffat, had a race he would rather forget. After dicing for the lead with Brock in the early laps, Moffat spun his Phase III Falcon at Sulman Park on top of The Mountain in the wet conditions. Although he would fight his way back, he would twice be penalised one minute for restarting his car during pit stops before the re-fueling had been completed. Later in the race the Falcon would also encounter brake problems and Moffat dropped back to finish the race in 9th place, 8 laps down on Brock.
Item includes certificate with individual production number.
The GT-HO was a true supercar and with a top speed of over 140mph, was the fastest four door sedan in the world at the time. Approximately 300 XY GT-HO Phase III Falcons were produced. This new XY had more subtle side striping than the XW, but it lacked none of the aggressive look people had come to expect. A functional, as well as decorative, air-cleaner assembly with a scoop protruding through a hole in the bonnet was standard. Ultimately this scoop assembly would become known as a “shaker”.
The driving lights, bonnet pins and bonnet blackouts enhanced the car’s appearance. The car was available in many colours and three trim colours, black, white and saddle.
As with the XW GT and the XY GT and previous GT-HOs, the Phase III had the top of the line interior with a centre console, a sports steering wheel and a sports dash with a 140mph speedometer and an 8000rpm tachometer.
The 351 cubic inch four barrel Cleveland engine was retained from the Phase II. Though the Phase II looked different from the Phase III, mechanically they were similar. The most significant engine improvement on the Phase III was the introduction of a full extractor exhaust system. A 780cfm Holley carburettor with a manual choke replaced the 750cfm Holley used on the Phase II. A few internal modifications to the Phase III allowed the engine to produce more horsepower.
Converting the power from the 5.8L Cleveland V8 was difficult with the standard tyres, upgrading to something more ‘suitable’ for the job was essential. This model has 12-slot rims, a favourite of the period, paired with the fattest tyres we could fit underneath the guards.
The XY was such a beautifully built car, with awesome power and handling to match. The ultimate model from the time when rubber and cubic inches were king.
Limited to 1000 units.
Item includes certificate with individual production number.
At the heart of Holden, is its loyal owners. Over seven decades Australian’s have cherished their Holden of choice.
As Holden enters a new era as a Service and Parts provider to the 1.6 Million Holden's still on the road, we celebrate the remarkable history of the Australian icon through The Final Chapter - a collection of limited edition products.
The Final Chapter is a book on an epic scale with 875 pages, spread across 4 Volumes, featuring images gleaned from deep within the Holden archive. Exploring the classic cars that shaped our nation, the muscle cars that got our hearts beating, the innovation and design processes that Holden became world-renowned for, and the contribution made to the country's automotive and motorsport landscape.
This magnificent book set captures Holden's iconic history from the very first to the very last car. Another true collector's item for Holden enthusiasts. Be sure to get in quick while stocks last.
Kids cap Holden 2019 Red Bull Racing.
- High density printed team logo to front
- Printed sponsor logos to side panels
- Printed Star logo under peak
- Adjustable snap back, one size fits most
100% polyester, Navy perforation on the back panel
High-Density print team logo on front
Printed dynamic bull under peak
Adjustable snapback
One size fits most
Additional product information
Size OSFM
Colour GREY/BLUE
Holden EH S4 Special 1964 ATCC Model 1:18 Scale. Limited to 750 editions. Item includes certificate and production number plate, mounted to the chassis.
330ml coffee mug.
Dishwasher & microwave safe.
1 pair of black socks – 75% polyester, 23% cotton, 2% elastane.
The history of Holden dates back to 1856 when it started as a saddlery business in South Australia. Holden was one of only seven fully-integrated global General Motors operations that designs, builds and sells vehicles for Australia and the world.
The perfect father’s day, Birthday or Christmas present or for anyone that has a man cave.
Another great item to add to your Holden collection
Holden Racing Team fans stopped in their tracks when HRT and Garth Tander unveiled their special Star Wars: The Force Awakens livery that would be raced by Tander and his co-driver Warren Luff at Bathurst. After Tander’s dark side of the force livery was revealed, all eyes then turned to what livery team mate James Courtney would be running with his co-driver Jack Perkins.
Contrast classic fit hoodie, cotton rich CVC fleece with kangaroo type front pockets.
This hoodie is sure to keep you warm, ideal on cool track days and/or everyday wear.
The new key ring combines elegance and function.
The accessories are made of dark blue PU leather, surrounded by light blue threads, with embossed Hyundai Motorsport and N logos.
The matte metal ring ensures a perfect connection with the car keys.
Leather keyring featuring the Jaguar logo, great for keeping your keys organised and carrying a sense of Jaguar’s sophisticated elegance with you wherever you go.
Wear a piece of the Jaguar story. These timeless cufflinks are crafted from milled steel and plated in gunmetal. Stylish accessories with a faceted design and debossed Jaguar Est. 1935 logo. Includes presentation box made from eco-conscious recyclable craft packaging.
This multi-function Bluetooth speaker is compact enough to take anywhere. And tough enough to take the knocks. Reinforced portable construction. Impact resistant. Carabiner attaches to bags. NFC pairing. USB charging. Doubles as power bank and mobile speakerphone.
ABS+Silicone
Reinforced portable construction.
Impact resistant.
Carabiner attaches to bags.
NFC pairing.
USB charging.
Doubles as power bank and mobile speakerphone.
A reversible T-shirt that adapts to the seasons. One side is made of thermoregulating merino fabric. And the other is made of breathable polyester fiber. Features flatlock seams and black reflective branding. Uses glass microlens technology to make you more visible in low light conditions.
A reversible T-shirt that adapts to the seasons. One side is made of thermoregulating merino fabric. And the other is made of breathable polyester fiber. Features flatlock seams and black reflective branding. Uses glass microlens technology to make you more visible in low-light conditions.
In rhodium-plated metal with an elegant reproduction of the Maserati Gran Turismo front grille. They come in a blue box with Maserati Gran Turismo personalization.
MC20 means Maserati Corse 2020 and celebrates the Brand's return to racing. The super sports car is the natural evolution of the highly successful MC12, the car that in 2004 marked Maserati’s return to racing after 37 years. MC20 underlines the sporting credentials of the new model: MC is the acronym of Maserati Corse and 20 refers to 2020, the year which marks the start of a new phase in Maserati’s history. The MC20 will be the first car born in the new Era of the Modena firm. Technical specifications: High quality resin models in 1/18 scale produced by BBR Exclusive Car Models Without opening parts Colour Bianco Audace
Exclusive. Responsible. High-performance. These are the concepts behind the new North Sails x Maserati collection, comprising a range of entirely unique garments driven by innovation. This T-shirt is crafted from organic cotton, elevated with framis tape detailing on the pocket and a rear print. - Composition: 100% cotton - Regular fit with crew neck and short sleeves - Made from organic cotton - Chest pocket is embellished with framis tape and Maserati logo - Maserati lettering on the back and North Sails patch on the sleeve - Washing: Do Not Bleach; Maximum Washing Temperature 30C° - Very Mild Process; Do Not Tumble Dry; Do Not Dry Clean; Wash Inside Out
The Audi A1 Sportback of the 2nd generation also impresses as a miniature with filigree die-cast zinc body. Scale: 1:43. GmbH Colour: Phyton Yellow This product is a collector's model and not a toy. Not suitable for children under the age of 14.
Wear this polo shirt made of piqué knit for all occasions.
This short sleeve polo combines softness, comfort and elegance.
The finishes have been chosen with great care.
A chic and modern style for this polo with a regular cut.
A jacket born from our dedication to design! Constructed from heat-welded panels, sport pullers and hidden side pockets. Lined with the signature Jaguar monogram print and stitching inspired by Jaguar design. Waterproof with DWR® coating. Outer shell: 72% nylon 28% polyester. Contrast fabric: 84% nylon, 16% elastane. Shell: 100% polyester. Lining: 100% polyester.
100% cotton.
5 panels. Interior finishing: soft lining.
Metal adjustment buckle. Logo on the buckle.
Comfortable and close-fitting.
Marking: embroidered logos and numbers.
Colour: Yellow.
Head size: 56cm.
Small-Medium Size. Renault logo embroidered on front of cap. Australian GP Special Australian colours Adjustable at back of cap with plastic buckle 100% cotton.
- rigid polycarbonate shell.
- zipper with combination lock.
- 3-position telescopic handle with push button.
- 360° swivel wheels on ball bearings.
- 2 compartments with lined interior and zippers.
- dimensions: 38 cm x 56 cm x 25 cm.
- weight: 2.4 kg
Li-ion 10.8V 2-Speed Drill/Driver
2-Speed Gearbox Optimum RPM Matching Application
Torque Adjustment Collar 18 Torque Settings+ Drill Mode - Max Torque 30Nm
Responsive VSR Switch Variable Speed with Reversible Control and Electric Brake
Built-in LED Light Convenient illumination of work area
Battery Indicator
Soft Grip Anti-Slip and Fatigue-Free
Includes 2 x Ah Batteries and Charger
A firm favourite amongst fans, Team Suzuki
Ecstar blue hoodie. Zipped pockets and drawstring hood. All team and sponsor logos are embroidered in high quality,
60% cotton, 40% polyester.
168 pages dedicated to Holden’s incredible motorsport history, covering a wonderful collection of all the great moments and achievements in what a real tribute to Holden’s iconic motorsport legacy.
Carry keys, passes or a USB stick securely and in style with this adjustable leather lanyard.
A new addition to our Reimagined Selection, this hazel brown lanyard is made from the finest-quality surplus leather from our cars. It features the Volvo logo and comes with a metal hook and safety breakaway lock.
Size: 90-94 cm x 9 mm.
Carry keys, passes or a USB stick securely and in style with this adjustable leather lanyard.
A new addition to our Reimagined Selection, this marble white lanyard is made from the finest-quality surplus leather from our cars. It features the Volvo logo and comes with a metal hook and safety breakaway lock.
Size: 90-94 cm x 9 mm.
This bottle designed by Italian design duo, Debiasi Sandri, is a stylish and sustainable choice. Made from high quality lacquered stainless steel, it has a capacity of 750ml
This bottle designed by Italian design duo, Debiasi Sandri, is a stylish and sustainable choice. Made from high quality lacquered stainless steel, it has a capacity of 750ml
